Login       My Wishlist
  My Cart
$0.00 / 0 items
 
LCGUI
Advancing Science and Engineering
 
International Access
Global Shipping Options Available
Home About Us News Our Blog Our Catalog My Cart My Account Track Shippment Contact Us
  Our Catalog

Maedler


Save on Maedler products at LCGUI. Hurry! Limited time offers. Offers valid only while supplies last.



Radial spherical bearing DIN 648-E type GE...DO relubricateable bore 40mm outer diameter 62mm == Initial lubrication required before use ==
Radial spherical bearing DIN 648-E type GE...DO relubricateable bore 40mm outer diameter 62mm == Initial lubrication required before use ==
In Stock
$14.80

mpn: 63364000,

Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated. Treated with molybdenum disulfide. Bearing shell (outer ring) cut.Dimensions according to DIN 648 / 12240-1 series E (slim version). Re-lubricateable (...


Angular drive with acetal bevel gears module 1 16 teeth 1:1 shaft-Ø 5mm
Angular drive with acetal bevel gears module 1 16 teeth 1:1 shaft-Ø 5mm
In Stock
$16.63

mpn: 41035510,

Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from hardened steel, dismountable.Bevel gears from acetal resin.Low cost angular gear drive, ratio 1:1, 6 sizes.Suitable for lower torques and intermittend use.Shafts running directly in ...


Universal joint KE, outer diameter 32mm, both sides bore 20H7
Universal joint KE, outer diameter 32mm, both sides bore 20H7
In Stock
$46.38

mpn: 63013200,

Material: Steel C 45.Max. Operating Angle 45°.The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective ma...


Universal joint KE, outer diameter 40mm, both sides bore 25H7
Universal joint KE, outer diameter 40mm, both sides bore 25H7
In Stock
$64.12

mpn: 63014000,

Material: Steel C 45.Max. Operating Angle 45°.The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective ma...


Universal joint KE, outer diameter 50mm, both sides bore 32H7
Universal joint KE, outer diameter 50mm, both sides bore 32H7
In Stock
$78.01

mpn: 63015000,

Material: Steel C 45.Max. Operating Angle 45°.The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective ma...


Extractable universal joint UW made of plastic/brass, bore 5mm telescoped length 240mm, max. travel 149mm
Extractable universal joint UW made of plastic/brass, bore 5mm telescoped length 240mm, max. travel 149mm
In Stock
$27.59

mpn: 63081100,

Material: acetal (black). Cross-pieces: brass. Joint faces are fitted with brass inserts, with 2 set screws per hub. Temperature range: -20°C to + 60°C.To shorten the teleshafts, please always cut off the same length on either side.* The stated pea...


Extractable universal joint UW made of plastic/brass, bore 5mm telescoped length 300mm, max. travel 184mm
Extractable universal joint UW made of plastic/brass, bore 5mm telescoped length 300mm, max. travel 184mm
In Stock
$31.64

mpn: 63081400,

Material: acetal (black). Cross-pieces: brass. Joint faces are fitted with brass inserts, with 2 set screws per hub. Temperature range: -20°C to + 60°C.To shorten the teleshafts, please always cut off the same length on either side.* The stated pea...


Extractable universal joint UW made of plastic/brass, bore 10mm telescoped length 450mm, max. travel 280mm
Extractable universal joint UW made of plastic/brass, bore 10mm telescoped length 450mm, max. travel 280mm
In Stock
$34.66

mpn: 63081700,

Material: acetal (black). Cross-pieces: brass. Joint faces are fitted with brass inserts, with 2 set screws per hub. Temperature range: -20°C to + 60°C.To shorten the teleshafts, please always cut off the same length on either side.* The stated pea...


Extractable universal joint UW made of plastic/brass, bore 10mm telescoped length 464mm, max. travel 281mm
Extractable universal joint UW made of plastic/brass, bore 10mm telescoped length 464mm, max. travel 281mm
In Stock
$39.48

mpn: 63082300,

Material: acetal (black). Cross-pieces: brass. Joint faces are fitted with brass inserts, with 2 set screws per hub. Temperature range: -20°C to + 60°C.To shorten the teleshafts, please always cut off the same length on either side.* The stated pea...


Extractable universal joint UW made of plastic/brass, bore 12,70mm telescoped length 500mm, max. travel 284mm
Extractable universal joint UW made of plastic/brass, bore 12,70mm telescoped length 500mm, max. travel 284mm
In Stock
$55.02

mpn: 63082800,

Material: acetal (black). Cross-pieces: brass. Joint faces are fitted with brass inserts, with 2 set screws per hub. Temperature range: -20°C to + 60°C.To shorten the teleshafts, please always cut off the same length on either side.* The stated pea...


Extractable universal joint UW made of plastic/brass, bore 20mm telescoped length 564mm, max. travel 304mm
Extractable universal joint UW made of plastic/brass, bore 20mm telescoped length 564mm, max. travel 304mm
In Stock
$60.59

mpn: 63083600,

Material: acetal (black). Cross-pieces: brass. Joint faces are fitted with brass inserts, with 2 set screws per hub. Temperature range: -20°C to + 60°C.To shorten the teleshafts, please always cut off the same length on either side.* The stated pea...


Ball joint RW, bore 20H7, outer diameter 40mm material steel
Ball joint RW, bore 20H7, outer diameter 40mm material steel
In Stock
$59.14

mpn: 63134000,

Material: Steel 11SMnPb37.Max. Operating Angle 35°.Temperature range: -70°C to +160°C.The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and l...


Internal gear made of brass Ms58 module 1 36 teeth tooth width 8mm outside diameter 60mm
Internal gear made of brass Ms58 module 1 36 teeth tooth width 8mm outside diameter 60mm
In Stock
$42.39

mpn: 26343600,

Tooth quality: 8, Teeth generated.Pressure angle 20°.Outside-diametre tolerance in accordance with DIN ISO 2768 middle.No. of Teeth36b [mm]8DA [mm]60d [mm]36di [mm]34MaterialMessing Ms58Weight [g]116...


Internal gear made of brass Ms58 module 1 40 teeth tooth width 8mm outside diameter 65mm
Internal gear made of brass Ms58 module 1 40 teeth tooth width 8mm outside diameter 65mm
In Stock
$42.39

mpn: 26344000,

Tooth quality: 8, Teeth generated.Pressure angle 20°.Outside-diametre tolerance in accordance with DIN ISO 2768 middle.No. of Teeth40b [mm]8DA [mm]65d [mm]40di [mm]38MaterialMessing Ms58Weight [g]137...


Internal gear made of brass Ms58 module 1 45 teeth tooth width 8mm outside diameter 70mm
Internal gear made of brass Ms58 module 1 45 teeth tooth width 8mm outside diameter 70mm
In Stock
$44.32

mpn: 26344500,

Tooth quality: 8, Teeth generated.Pressure angle 20°.Outside-diametre tolerance in accordance with DIN ISO 2768 middle.No. of Teeth45b [mm]8DA [mm]70d [mm]45di [mm]43MaterialMessing Ms58Weight [g]151...


Internal gear made of brass Ms58 module 1 50 teeth tooth width 8mm outside diameter 75mm
Internal gear made of brass Ms58 module 1 50 teeth tooth width 8mm outside diameter 75mm
In Stock
$48.18

mpn: 26345000,

Tooth quality: 8, Teeth generated.Pressure angle 20°.Outside-diametre tolerance in accordance with DIN ISO 2768 middle.No. of Teeth50b [mm]8DA [mm]75d [mm]50di [mm]48MaterialMessing Ms58Weight [g]159...


Internal gear made of brass Ms58 module 1 55 teeth tooth width 8mm outside diameter 80mm
Internal gear made of brass Ms58 module 1 55 teeth tooth width 8mm outside diameter 80mm
In Stock
$52.03

mpn: 26345500,

Tooth quality: 8, Teeth generated.Pressure angle 20°.Outside-diametre tolerance in accordance with DIN ISO 2768 middle.No. of Teeth55b [mm]8DA [mm]80d [mm]55di [mm]53MaterialMessing Ms58Weight [g]174...


Internal gear made of brass Ms58 module 1 60 teeth tooth width 8mm outside diameter 85mm
Internal gear made of brass Ms58 module 1 60 teeth tooth width 8mm outside diameter 85mm
In Stock
$53.95

mpn: 26346000,

Tooth quality: 8, Teeth generated.Pressure angle 20°.Outside-diametre tolerance in accordance with DIN ISO 2768 middle.No. of Teeth60b [mm]8DA [mm]85d [mm]60di [mm]58MaterialMessing Ms58Weight [g]182...


Internal gear made of brass Ms58 module 1 65 teeth tooth width 8mm outside diameter 90mm
Internal gear made of brass Ms58 module 1 65 teeth tooth width 8mm outside diameter 90mm
In Stock
$55.87

mpn: 26346500,

Tooth quality: 8, Teeth generated.Pressure angle 20°.Outside-diametre tolerance in accordance with DIN ISO 2768 middle.No. of Teeth65b [mm]8DA [mm]90d [mm]65di [mm]63MaterialMessing Ms58Weight [g]204...


Internal gear made of brass Ms58 module 1 70 teeth tooth width 8mm outside diameter 95mm
Internal gear made of brass Ms58 module 1 70 teeth tooth width 8mm outside diameter 95mm
In Stock
$61.65

mpn: 26347000,

Tooth quality: 8, Teeth generated.Pressure angle 20°.Outside-diametre tolerance in accordance with DIN ISO 2768 middle.No. of Teeth70b [mm]8DA [mm]95d [mm]70di [mm]68MaterialMessing Ms58Weight [g]218...



Viewing Page 1 of 19

Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service
© 2018 - lcgui.net. All Rights Reserved.