Martin - Super Savings! Save up to 37%
Super Savings! Up to 37% off on Martin products at LCGUI. Hurry! Limited time offers. Offers valid only while supplies last.
Martin Roller Chain Sprocket, Hardened Teeth, Idler, Type C Hub, Single Strand, 50 Chain Size, 0.625" Pitch, 17 Teeth, 0.5" Bore Dia., 3.72" OD, 0.343" Width
You Save: 13%
mpn: 50BB17H 1/2, ean: 0697950340487,
The Martin ball bearing idler sprocket is suitable for use with the series 50 chain, 5/8” pitch. Varying numbers of teeth and stock bore sizes offer application flexibility. Made from high carbon steel, it has high strength and durability. The opt...
Martin SRL099/100 Spider, Buna-N Rubber, Inch, 6 Teeth
mpn: SRL099/100, ean: 0697950149035,
This Martin spider replaces Buna-N rubber spiders on Martin universal series (ML) or Martin super series (MS) jaw style flexible coupling assemblies and is made of nitrile rubber for transferring and absorbing shock load. This center element, also kn...
Martin S1020BS 3/4 Spur Gear, 14.5° Pressure Angle, High Carbon Steel, Inch, 10 Pitch, 3/4" Bore, 2.2" OD, 1.000" Face Width, 20 Teeth
mpn: S1020BS 3/4, ean: 0697950438986,
The Martin high carbon steel spur gear with 14.5-degree pressure angle (PA) and a diametral pitch (DP) of 10 transmits torque between parallel shafts to provide rotational power to another part of a motorized system. It has a 14.5-degree pressure ang...
Martin Roller Chain Sprocket, Bored-to-Size, Type B Hub, Single Strand, 60 Chain Size, 0.75" Pitch, 15 Teeth, 1.5" Bore Dia, 3.978" OD, 2.875" Hub Dia, 0.459" Width
mpn: 60BS15 1 1/2, ean: 0697950015545,
The Martin type BS sprocket, also known as a bored-to-size sprocket, includes two setscrews and a keyway, and is suitable for use with the series 60 chain with a 3/4” pitch. This sprocket has been adapted for installation on the shaft without addit...
Martin 8S 7/8 Quadraflex Coupling Flange, Sintered Steel, Inch, 0.875" Bore A, 0.875" Bore B, 5.45" OD, 2.094" Length, 1135 in-lbs Nominal Torque
You Save: 11%
mpn: 8S 7/8, ean: 0697950277738,
This Martin Quadra-Flex spacer coupling flange replaces flanges on specific Martin Quadra-Flex series flexible couplings and is made of steel sintered with powdered metals for strength, durability, and corrosion resistance. It transfers shock and mis...
Martin 6018 Coupling Cover Seal, Nylon, Inch
mpn: 6018SEAL, ean: 0697950368016,
This Martin coupling cover seal is for use with Martin taper bushed, Quick Disconnect (QD) and stock, and finished bore roller-chain style couplings, and replaces a seal on a Martin coupling cover (sold separately). It seals in lubricants and keeps c...
Martin 5016 Roller Chain Coupling, Sintered Steel, Inch, 16 Teeth, 1 7/16" Bore, 3 25/32" OD, 1 7/16" Length, 4000 rpm Max Rotational Speed, 3/8" x 3/16" Keyway
mpn: 5016 1 7/16, ean: 0697950047096,
This Martin hub is one of two simplex sprockets used in a roller chain coupler for joining and transmitting power to two perpendicular shafts. It is made of sintered steel for strength and hardness and has hardened teeth for resistance to wear and fa...
Martin 10H Quadraflex Sleeve, Hytrel, Inch, 7.0625" OD, 3.438" Length
mpn: 10H, ean: 0697950275093,
This Martin Quadra-Flex coupling sleeve is for use with Martin S and SC style flanges in the Quadra-Flex series flexible couplings. It is made of thermoplastic polyester elastomer for high torque and high temperature applications and its teeth help t...
Martin 1 C 70 SF V-Belt Drive Sheave, C Belt Section, 1 Groove, SF Bushing required, Class 30 Gray Cast Iron, 7.4" OD, 3353 max rpm, 7" Pitch Diameter
mpn: 1 C 70 SF, ean: 0697950084985,
This Martin V-belt drive sheave with a C belt section is made of 30 gray cast iron and comes with one groove. It is a classical V-belt sheave that fits a variety of widely available, classical profile V-belts suitable for use in many existing power t...
Browse Our Catalog