Sealmaster SFT-16 Standard Duty Flange Cartridge Unit, 2 Bolt, Regreasable, Felt Seals, Setscrew Locking Collar, Cast Iron Housing, 1" Bore, 4-7/8" Overall Length, 3-57/64" Bolt Hole Spacing Width, 17/32" Flange Height, ±2 Degrees Misalignment Angle
Huge Savings Item! Save 17% on the Sealmaster SFT-16 Standard Duty Flange Cartridge Unit, 2 Bolt, Regreasable, Felt Seals, Setscrew Locking Collar, Cast Iron Housing, 1'' Bore, 4-7/8'' Overall Length, 3-57/64'' Bolt Hole Spacing Width, 17/32'' Flange Height, ±2 Degrees Misalignment Angle by Sealmaster at LCGUI. MPN: SFT-16. Hurry! Limited time offer. Offer valid only while supplies last. This Sealmaster SFT standard-duty flange cartridge unit has a cast iron housing with two bolt holes, felt seals, and setscrew locking collar. It is
This Sealmaster SFT standard-duty flange cartridge unit has a cast iron housing with two bolt holes, felt seals, and setscrew locking collar. It is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The housing has machined foot pads and is made of solid cast iron for rigidity and vibration damping. It is equipped with a grease fitting on the outer surface for reapplying lubricant. A cylindrical pilot extension on the back face provides accurate placement in the mounting surface bore during installation and increases stability during operation. This housing type is designed for applications with rotating and eccentric loads. The double-sealed, deep-groove ball bearing cartridge insert in the housing is rated "standard duty" for applications with moderate radial loads and light to moderate thrust or combination loads. The bearing is made of vacuum degassed 52100 chrome steel, and the inner and outer races are coated with black oxide for corrosion resistance. The inner ring is extended to provide extra shaft support. A pin and dimple anti-rotation rivet on the outer ring prevents rotation of the ring in the housing, reducing heat buildup and prolonging the bearing life. This self-aligning bearing has a convex sphered outer surface that compensates for misalignments. Low-friction felt labyrinth seals on both sides of the bearing retain lubricant applied at manufacture and help keep contaminants out. For added protection, flingers on the inner ring deflect contaminants away from the seals. The bearing locks onto the shaft with two setscrews spaced 120 degrees apart for a three-point contact hold. This lock type minimizes ring distortion and vibration and is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. Flanged bearing units are suitable for use in industrial and commercial applications including conveyors, fans and blowers, construction machinery, and processing equipment, among many others.
Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.
Sealmaster manufactures bearings and bearing accessories. The company, founded in 1938 and headquartered in Elsmere, KY, meets International Organization for Standardization (ISO) standard 9001.
Features & Highlights
- Cast iron flanged housing with a pilot extension for accurate location and increased stability
- Standard-duty, deep-groove ball bearing insert for applications with moderate radial loads and light to moderate thrust or combination loads
- Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection
- Setscrew lock for a three-point contact hold on the shaft
- Grease fitting on the housing for reapplying lubricant
|Item Size:||1.5 x 4 x 4 inches|
|Package Weight:||1.45 pounds|
|Package Size:||4.1 x 1.6 x 1.6 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Sealmaster, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Boca Bearing Company
RC Car & Truck Econo bearing Flanged 10 packs are the most affordable way to replace stock bearings with high quality standard bearings. Boca's Econo RC Bearings have long been the industry standard for backyard bashers the world over. These bearings...
By Hub City
mpn: 1002-07289, ean: 0662798256825,
This Hub City FB250UR series flange block has a cast iron housing with four bolt holes and a set screw locking collar. This bearing unit is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The cast iron housing is rigid an...
By Hub City
mpn: 1002-07307, ean: 0662798256887,
This Hub City FB260UR series flange block has a cast iron housing with two bolt holes and a set screw locking collar. This bearing unit is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The cast iron housing is rigid and...
mpn: a14102400ux0642, ean: 0702105939123,
Two-Hole, metal and flange-mounted ball transfer unit can also be used in a variety of non-industrial applications, including retail store displays and airport luggage transfers. Ball support cup is hardened and plated. Protective cover assures low t...
mpn: RCJ1 3/4, ean: 0087796060258,
This Timken RCJ series cast iron flanged cartridge bearing unit is composed of a cast iron flanged housing equipped with four bolt holes for use in industrial field applications. Within the housing is a double rubber sealed single row ball bearing th...
Flange Mount Bearing, Number of Bolts 2, Series F2DC-BL, Bore Dia. 1", Bearing Type Flange Mount, Bearing Material 52100 Steel, Housing Material Zinc Die Cast, Locking Type Set Screw, Mounting Hole Center 3", Overall Height 1-3/16", Overall Width 2-1...
mpn: UCFC207, ean: 0748139266699,
Shaft Dia d (mm): 35L Dimensions mm : 135P Dimensions mm : 110A2 Dimensions mm : 11A1 Dimensions mm : 26j Dimensions mm : 8K Dimensions mm : 9N Dimensions mm : 14f Dimensions mm : 90S Dimensions mm : 17.5E Dimensions mm : 36.4Bolt Used mm : M12Bolt U...
mpn: VF2S-220, ean: 0662289521371,
This Browning VF2S series normal-duty flange unit has a cast iron housing with two bolt holes, contact and flinger seal, and setscrew lock. It is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The housing has a semi-soli...
mpn: FY 1. TF, ean: 7316577754882,
This SKF FY-TF series ball bearing flange unit has a cast iron housing with four bolt holes, contact and flinger seals, and set screw lock. It is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The housing is made of gray...
mpn: UCPE212-36, ean: 0748139261595,
Shaft Dia d (in): 2.25H Dimensions mm : 69.8A Dimensions mm : 241E Dimensions mm : 184B Dimensions mm : 70S2 Dimensions mm : 25S1 Dimensions mm : 20G Dimensions mm : 25W Dimensions mm : 138Bi Dimensions mm : 65.1N Dimensions mm : 25.4Bolt Used mm : M...